Home

Hazard identification and risk assessment importance in health and community services

OSHA & EM 385 Compliant · Cloud-Based Program · Follows UFGS Forma

Activity Hazard Analysis - OSHA & EM 385-1-1 Complian

  1. The purpose of this Hazard Identification and Risk Assessment (HIRA) is to help whole community members to identify and understand possible vulnerabilities within the State of Florida as well as the Nation. The HIRA is part of the Presidential Directive 8/PPD -8: National Preparedness which asks multiple federa
  2. 7. HAZARD IDENTIFICATION AND RISK ASSESSMENT 7.1 Introduction life and deterioration of health and health services on a scale sufficient to warrant an extraordinary response from outside the affected area or community. Disasters occasioned by man are factory fire explosions and Validation of software is important t
  3. Health Hazard Assessment and Prioritization (hHAP). This tool was developed by the Los Angeles Department of Public Health—in collaboration with the Orange County Health Care Agency, the Long Beach Department of Health and Human Services, and the Pasadena Department of Public Health—and provides a 6-step hazard vulnerability assessment process
  4. Spot the Hazard (Hazard Identification) Assess the Risk (Risk Assessment) Make the Changes (Risk Control) At work you can use these three ThinkSafe steps to help prevent accidents. Using the ThinkSafe steps 1. Spot the hazard. Key point: A hazard is anything that could hurt you or someone else. Examples of workplace hazards include: frayed.
  5. Community Risk Assessment Guide 1 Preface Community Risk Reduction Community Risk Reduction (CRR) is defined by Vision 20/20 as a process to identify and prioritize local risks, followed by the integrated and strategic investment of resources (emergency response and prevention) to reduce their occurrence and impact

Hazard Identification, Risk Assessment and Control Procedure. 1. Purpose. To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage workplace and safety hazards within the Western Sydney University. 2. Preambl Legal and ethical matter Brief description Importance in health and community services Consequence of breach Work role boundaries Click here to enter text. Click here to enter text. Click here to enter text. Hazard identification and risk assessment Click here to enter text. Click here to enter text. Click here to enter text This Hazard Identification and Risk Assessment (HIRA) workbook can help guide you in answering these questions. A HIRA can: •Help you to prepare for the worst and/or most likely hazards. •Save time by isolating any hazards which can not affect your community. •Allows for the creation of emergency plans, exercises and training based on the. hazard identification and risk assessment processes documented. • The well hazard identification process should consider all operating modes and activities that are expected to occur. • The well integrity risk assessment process should recognise that combinations of failures can occur, even though these may appear highly unlikely

Hazards and risks can occur at any work site. It is important to understand hazard recognition and risk tolerance in order to evaluate risks and prevent any potential accidents from occurring. A critical element of any effective safety and health program is the proactive, continuous identification, assessment, and communication of hazards to. Health and safety in community support services. Our tools and guides can be used to assess and control the specific risks in your workplace. Consult. Involving your employees in health and safety issues can result in a safer workplace. That's why consultation is an important part of risk management

A risk assessment is a written document that records a three-step process: 1 Identifying the hazards in the workplace(s) under your control. 2 Assessing the risks presented by these hazards. 3 Putting control measures in place to reduce the risk of these hazards causing harm. There are five important terms you need to understand when doing a. Risk assessment: The process of evaluating the likelihood and severity of harm arising from a hazard. Risk control: The process of implementing measures to reduce, as far as reasonably practicable, the risk associated with a hazard. The control process must follow the risk control hierarchy, in order, as prescribed in health and safety legislation 9.Outline the principles of hazard and risk management regarding risk analysis in community services work environments. 10.Outline two hazard identification procedures according to the principles of hazard and risk management. 11.Provide an example of how you would apply Level 2 of the hierarchy of control to control a hazard in a community.

Scope of the Hazard Identification and Risk Assessment Study: Identification of the individual tasks involved in carrying out the above operations. Determination of the level of risk by combining the likelihood of a hazard occurring with its severity using the Risk matrix. Analyzing the existing control measures available to control these risks Human health risk assessment. Human health risk assessment is a way of assessing the potential impact of a hazard on the health of a person, group of people or a community. Factual, technical information is used to understand the potential health effects. Each human health risk assessment is unique to the situation and population being assessed A thorough Hazard Identification and Risk Analysis, or risk, system is the core element in the RBPS pillar of understanding hazards and risk. This chapter describes the meaning of risk for RBPS purposes, the attributes of a risk system, and the steps an organization might take to implement a robust program for identifying hazards and analyzing. A hazard identification checklist, also known as a hazard assessment form, is a tool used by safety officers in performing hazard assessments. The main purpose of a hazard assessment is to identify potential health and safety hazards by examining conditions or practices in the workplace. Performing regular hazard assessments is critical for. 3.3 Sample risk assessment work sheet 49 3.4 Sample risk control work sheet 50 Consulting with employees and clients on health and safety issues is important. Effective occupational health and safety risk management can enhance clients' 6 WORKSAFE VICTORIA/ WORKING SAFELY IN COMMUNITY SERVICES HEALTH AND SAFETY BASICS

Identification of all potential hazards, hazard sources and hazardous events within a facility is important to enable a thorough risk assessment to be undertaken.. Scope. Under section 61D (b) of the Public Health Act 2005, a water risk management plan (WRMP) must identify hazards, hazard sources and hazardous events within a facility's water distribution system Hazard identification is part of the process used to evaluate if any particular situation, item, thing, etc. may have the potential to cause harm. The term often used to describe the full process is risk assessment: Identify hazards and risk factors that have the potential to cause harm (hazard identification) A classic human health risk assessment is based on four stages: 1. Issue identification. This is a process to identify issues for which risk assessment is useful. It establishes a context for the risk assessment. This is done by identifying the concerns that the risk assessment needs to address. 2. Hazard identification and dose-response assessment

Best In Class Solutions · Most Trusted Brands · No Cost Assessment

5 YEARS LTI-FREE – TESTAMENT TO JSW’S COMMITMENT TO SAFETY

Incorporate a system for hazard identification, risk assessment and risk control. rk procedures, and current legal safety and health requirements. safety information, orientation for new employees, safety training for new procedures, special safeguards for young workers, and keeping a record of injuries, near misses and potential hazards critical infrastructure, systems, and community features at risk to identified threats and hazards. 15. Risk and Disaster Resilience Assessment Maintain a risk assessment that includes identification and analysis of information about security gaps, localized vulnerabilities and risk consequences in City systems and facilities. 16 or it can be used to assess the risk of a hazard from the unique perspective of either the public health system or healthcare system, respectively, using one of the two -analyses. These sub sub-analyses are the Public Health System Risk Assessment and the Healthcare System Risk Assessment (illustrated in Figures 1, 2, and 3) U.S. Department of Health and Human Services' enters for Disease Control and Prevention Public important hazards—highly probable and/or major public health impacts—are planned for first, and Health Hazard Risk Assessment and Whole Community Planning E n g a g e S ta k e h o l d e r A g e n c i e s &

Focusing on these areas, a risk assessment team can then use several different methods to identify the hazards present in the workplace. One such method is a hazard identification (HAZID) study that offers a qualitative, structured technique for risk identification Development of a Risk Assessment Plan - 2.0 6 Risk Rating Matrix - 3.0 7 Definitions of Risk Ratings - 3.1 7 Likelihood Scoring Scale - 3.2 8 Impact Scoring Scale - 3.3 9 Provincial Hazard Identification - 4.0 10 Provincial Results - 5.0 12 Section 2 Appendix A Hazard Classification & Definitio Monitor environmental and health status to identify and solve community environmental health problems. and local jurisdictions involved in the delivery of environmental public health services in the United States is the potential for developing _____ approaches In the hazard identification step of risk assessment, a _____ analysis. The purpose of the Hazard Assessment Program is to provide the university community guidance on how to manage the risk of serious injury/illness, property and environmental damage associated with hazardous processes and work activities at Virginia. Such reviews are required by the university Health and Safety Policy

Industrial Hazard Assessment - Workplace Safety Assessmen

  1. 2019 National Threat and Hazard Identification and Risk Assessment 3 Setting national capability targets The 2019 National THIRA builds on previous assessments of catastrophic national risks, taking the analysis a step further by identifying the capabilities necessary to address those risks
  2. The Health and Community Services module should be done after the General module. If it is some time since you have done the General module, you should read the Review module. The test for this module contains some questions based on the Review module. There are common hazards that exist in the health and community services industry
  3. Sample Risk and Hazard Vulnerability Assessment This Risk and Hazard Vulnerability Assessment will assist school districts/schools to plan in ways that compliment the All Hazards planning done by the community. It is important that School District/School All Hazard Plans integrate well with municipal emergency management plans
  4. Hazard identification and assessment. Hazard prevention and control. Education and training. Program evaluation and improvement. Communication and coordination for host employers, contractors, and staffing agencies. Employers of veterinary medicine and animal care workers should: Develop and implement a comprehensive written workplace-specific.
  5. ent, threatened or actual act of terrorism. Protection Protect our citizens, residents, visitors, and assets against the greatest threats and hazards in a.
Русский АвтоМотоКлуб | Экспресс-помощь на дорогах для

Small Business Answers - Best stay at home job?I have 3

Hazard identification is identifying what could cause injury or ill health in your processes, and this is obviously important so that you can do something about these hazards to prevent injury and ill health. Risk assessment is looking at the top level risks that can affect the OH&S in the organization, and again making plans to avoid serious. 3.1 Hazard identification in the context of WVA prevention and management The nature and location of work, type of clients, business hours, services and facility access, staffing levels and varied employee skill set will affect the hazards present in a workplace and the risk of exposure to WVA This document is useful for employers, self-employed people, and those with management and control of workplaces, who have duties to ensure health and safety under the OHS Act 2004. It's a solution for controlling OHS hazards and risks, involving: a systematic approach. consultation. finding potential hazards. risk assessment. fixing the. An assessment is the process of identifying hazards so they can be eliminated or controlled. What the law says Ontario's Occupational Health and Safety Act (OHSA) states that employers must take every reasonable precaution to protect workers, provide information and instruction, and to ensure that workers properly use or wear the required.

• monitor the health and safety of workers e.g. review injury records • keep records of work-related incidents and injuries • identify hazards, conduct risk assessments and control risks (i.e. see, assess and fix hazards, and evaluate and review outcomes - sometimes called the SAFER approach Background. This page describes some of the hazards and priorities that you may encounter in health care and community care workplaces and employers' responsibilities under the Occupational Health and Safety Act (OHSA) and its regulations.You can also contact your health and safety association for guidance on controlling hazards.. In general, employers are required under the OHSA to provide.

Hazards and Risks Identification and Control Sound occupational health and safety policies are essential for employees, but they are also increasingly important for your customers and other stakeholders. Occupational Health and Safety Management systems certification to OHSAS 18001 is a strong sign of a organization's commitment to employees' health and safety Risk management is a proactive process that helps you respond to change and facilitate continuous improvement in your business. It should be planned, systematic and cover all reasonably foreseeable hazards and associated risks. The four steps for managing WHS risks are: Step 1 - Identify hazards Introduction. The chemical risk assessment process provides an estimate of the likelihood that a specific chemical may contribute to adverse health outcome(s) in the general population and susceptible populations [1,2].Risk assessors use information from a variety of fields including environmental epidemiology, toxicology, and exposure science to inform management and policy decisions (e.g. A proactive and responsible stance on hazard identification and mitigation is the reason the statistics for work-related injuries or fatalities are at their lowest point ever. Additionally, being a responsible employer by taking an active role in worker safety by reducing hazards will reflect better on the company both in the market and community

Why Hazard Identification is so Important 152h

An infection risk assessment considers potential hazards and prioritizes them to better guide goal-setting and strategy development. Infection control risks can stem from a variety of areas in a healthcare organization, and most can lead to significant patient (or staff) harm

Importance of Hazard Identification and Risk Assessmen

1 Risk assessment and management Risk assessment and management The Education and Care Services National Law requires you to 'ensure that every reasonable precaution is taken to protect children from harm and from any hazard likely to cause injury' (Section 167) Risk assessment is a step in the OSH risk management process. Important concepts. Important concepts in risk management are the concepts of hazard and risk. A hazard is a source, situation, or act with a potential for harm in terms of human injury or ill health, or a combination of these. Therefore, a hazard can be anything present in the.

identification in their facility/service and that such identification is actively undertaken. Workers should also be encouraged to identify and report any hazards associated with occupational exposure. 3.2 Risk Assessment Risk assessment is critical to determine the strategies required to achieve the elimination or minimisation of risks It includes not just health and safety risk assessment, but also clinical risk assessment (which is not tackled in this article). It translates information about risk management into practical advice for community pharmacists with real-life examples from pharmacies, she explains. The HSE provides a five-st ep p lan to risk assessment and. national risk assessment is a strategic risk assessment that supports the design of national DRR strategies, policy and regulations, DRM programming, and budget allocation. A local risk assessment is an operational risk assessment for DRR action planning, contingency planning, pre-disaster recovery planning, and prope There is a hierarchy (or order) of steps you need to follow when managing hazards and risks in your workplace. Businesses must always try to eliminate any health and safety hazards and risks in the workplace. If a hazard cannot be removed, you must minimise it by substituting (entirely or partly) the hazard with something with a lesser risk Information about Victoria's community health services, including registration and governance, the Community Health Program, demand management, service improvement and services targeted at population groups at risk of poorer health outcomes. Dental health

Use this template to document a risk assessment to manage health and safety hazards in your workplace. Identify observed potential and existing hazards (e.g biological, chemical, energy, environment, etc.), assess the risk level (consequence, likelihood and risk ratings) and provide necessary control measures. Monitor and review planned control. 3. 1 Why risk assessment is important A 'risk' refers to the possibility of something happening. In moving and handling, the term 'risk' is usually used to refer to the possibility of an injury or other negative outcome occurring. A low risk means a low likelihood of a negative outcome. A 'hazard' is a feature of a task or environmen Through the services of our outsourced Accreditation Specialist, HIRA: The Importance Of Doing Hazard Identification And Risk Assessments. HIRA or Hazard Identification and Risk Assessment is a critical part of... Read More. ken May 26, 2020 Hazard Vulnerability/Risk Assessment. Hazard vulnerability analysis (HVA) and risk assessment are systematic approaches to identifying hazards or risks that are most likely to have an impact on a healthcare facility and the surrounding community. Conducting a risk assessment / HVA is also a requirement in the CMS Emergency Preparedness Rule Step 1: Hazard identification is the first step of a human health risk assessment. Hazard Identification is the process of determining whether exposure to a stressor can cause an increase in the incidence of specific adverse health effects (e.g., cancer, birth defects). It is also whether the adverse health effect is likely to occur in humans. In the case of chemical stressors, the process.

Hazard Identification and Risk Assessmen

Human health risk assessment includes 4 basic steps: Planning - Planning and Scoping process. EPA begins the process of a human health risk assessment with planning and research. Step 1 - Hazard Identification. Examines whether a stressor has the potential to cause harm to humans and/or ecological systems, and if so, under what circumstances Box 3. Examples of Hazard Identification, Risk Assessment, and Risk Reduction Activities lists examples of risk assessments and reduction strategies that might commonly involve OHS. Controlling exposures to occupational infections is a fundamental method of protecting HCP. Traditionally, a hierarchy of controls (Figure 1

Hazard identification, risk assessment and risk contro

CHCCOM005 CHCLEG001

The hazard identification and risk assessment forms the basis for establishing and documenting health and safety objectives and targets, and subsequent action to achieve established objectives and targets. Each hazard classified as representing a priority risk requires an action plan with recommendations to control that risk Today, hazard or risk assessment goes well beyond the fire problem to medical and other emergencies. This all-hazards approach provides the opportunity to have a much bigger impact on life safety and property loss. At the same time, it makes the process of conducting a community risk assessment inherently more complex operations of clinical services, the CRM Guidelines are relevant to all health employees to understand and employ within comprehensive clinical governance system. It is acknowledged that there is significant overlap between clinical and corporate risk within health services/hospitals and a consistent and co-ordinated approach should be maintained The manual complements existing hazard-specific risk assessment guidance (see Appendices 1 and 2), including: • WHO Human Health Risk Assessment Toolkit: Chemical Hazards1 • Application of Risk Analysis to Food Standards Issues, a Joint FAO/WHO Expert Consultation, Geneva, Switzerland, 13-17 March 19952

Hazard Identification and Risk Assessment Safety Moment

Clinical Practice Guideline. A 2012 Cochrane Systematic Review reported that clinical assessment by a health care provider combined with individualized treatment of identified risk factors, referral if needed, and follow-up reduced the rate of falls by 24%. 14 Similarly, the US Preventive Services Task Force found that multifactorial clinical assessment and management, combined with follow-up. Biosafety Risk Assessment Hazard Exposure Activities and Controls Repository version 004-06-22-2016 (Excel) Biosafety Risk Assessment General Considerations Worksheet version 004-06-22-2016: .PDF. Biosafety Risk Assessment Risk Likelihood and Consequences Evaluation Worksheet version 004-06-22-2016: .PD Generates an estimate of hazard-specific risk, based on probability and impact severity identified for each hazard. sources or by variou services, inpatient healthcare infrastructure, and community health and public health services. Generates adjusted risk, which incorporates an assessment of the additional planning required to reduc Hazard identification and risk assessment are concerned with identifying hazards, assessing risk from these hazards, and taking actions to control or reduce the risks. There should be an identification of the hazards at an early stage of any operation to enable effective measures to prevent accidents Assess the risk. A risk is the likelihood of a hazard causing injury, illness or damage to your health. Your list of hazards may be long, with some hazards posing more safety risks than others. So you need to work out which hazards are more serious than other and deal with those first. To assess the risk associated with each hazard, ask these.

A hazard is a source or a situation with the potential for harm in terms of human injury or ill-health, damage to property, damage to the environment, or a combination of these. Hazards at work may include noisy machinery, a moving forklift, chemicals, electricity, working at heights, a repetitive job, or inappropriate behaviour that adversely. STEP 2: Develop the Plan's Risk Assessment. The risk assessment includes the identification of the location and geographic extent of natural and human-caused hazards that can affect the City. The hazard impacts and future probability of occurrence is also determined. Scientific and historical evidence of past events is collected and evaluated For these reasons, procedures involving awake-behaving nonhuman primates must undergo additional hazard identification and risk assessment. It is also important that risk assessment of noninfectious hazards involve a qualified health and safety professional with training in the chemical and ergonomic hazards associated with their use

The 5 Ways We Identify Hazards Hazards are objects and in themselves don't harm anyone. An object only becomes a hazard when a human engages with it, until then it remains a potential hazard. One can focus as much on displacement of energies and damaging energies as one wants but unless there is some understanding about human judgment and decision making the object remains a neutral object. Risk Assessment Methodology • Requirements: - Clear definition of terms: • Risk question • Hazard identification • Qualitative risk assessment: risk categories and combination matrix - Transparency: • A risk assessment must be clearly set out, transparent and fully referenced in the resulting repor The risk assessment process should be used to identify hazards in your work activity and to evaluate the control measures that you have in place to manage these risks. The aim is to ensure that your activities are carried out without risks to the health and safety of your employees and others

The Risk Factor Selection Tool helps you to identify the additional specific risks that are present at your workplace. If an additional specific risk is identified, you will be prompted to complete a separate assessment for each additional risk. The method of completing this assessment is the same as for the General Physical Environment assessment Benefits of a Risk Assessment. Conducting a risk assessment has moral, legal and financial benefits. In 2016, a school in Brentwood, England pleaded guilty after failing to comply with health and safety regulations. A 63-year-old employee was working on the roof when his foot got caught, causing him to fall nearly 10 feet These hazards and associated risks must be managed to ensure the safety of staff, students and others. Information about managing common hazards is included in this section. Each of the following topics include departmental procedures and guidelines, resources, legislation and related links. Click on the subject area for more information

Community support services: Safety basics - WorkSaf

Health and Safety Executive Risk assessment: A brief guide to controlling risks in the workplace Page 2 of 5 Look back at your accident and ill-health records - these often help to identify the less obvious hazards Risk assessment for event planning may seem like a daunting prospect, so we've prepared this guide to assist you in identifying potential hazards and taking the necessary steps to protect your patrons, employees, and talent. COVID-Safe Event Planning. COVID-19 can impact any event - even online events have safety considerations to keep in mind Essential Service #2: Diagnose and investigate health problems and health hazards in the community. Essential Service #2 encompasses public health activities such as: Epidemiologic identification of emerging health threats; Public health laboratory capability using modern technology to conduct rapid screening and high volume testing

VIII. Risk Assessment A. The potential for workplace violence is evaluated as part of risk assessment, and programs are developed to manage it. B. UWH conducts proactive risk assessments to evaluate the potential for adverse impact on the security of patients, staff, and other people coming to the organization's facilities. Among the elements. Health and safety guidance and resources for businesses that provide medical or health care services in a hospital or clinic. Or provide services such as aged care, child care or welfare support. A general worker manual tasks safety hazards identification checklist. PDF 40.8 kB 28 August 2020. A form completed before lead risk work to. The approach recommended in the Health and Community Services Sector is known as the minimal lift approach. This means that manual handling tasks are eliminated where possible and, where they can't be eliminated, equipment is used to reduce the risk of a manual handling injury to as low a level as possible - leading to safer manual handling Workplace Procedures for Hazard Identification - Research. If you have a well-versed knowledge of the hazards related to a job, you will be able to identify the appropriate strategy to handle risk quickly. It is best to research the proper health and safety requirements for each task

Risk assessment is necessary in situations of change, such as when expanding business operations, changing the nature of the operations, restructuring the organization, renovating the premises, or making personnel changes. In addition to regular, comprehensive hazard identification carried out in the workplace, a method for daily safety. Use this risk assessment template to assess and classify hazards related to biological, chemical, environmental, machinery, and other potential risks that impact health and safety. Select the impact, probability, and risk level for each hazard, and then establish control measures to reduce risk severity and likelihood Very comprehensive checklist that can be used to document a risk assessment to manage health and safety hazards and risks. Health and Safety Risk Assessment Checklist (8951 downloads) Free Risk Assessment Form Use this free form to describe, analyse, assess, rate and control hazards or risks. Download Word version Minimize The Risk. Always supervise babies and young children when bathing. If the phone rings at bath time, then leave it. It is not as important as your child's safety. Ring them back when bath time is over! Keep toilet lids closed. If you have a swimming pool or pond then it should be in a fenced area

Hazard Identification, Risk Assessment and Control Procedur

This revised leaflet aims to help you identify, assess and control health and safety risks associated with workplace hazards - the guidance replaces 'Five steps to risk assessment'. It is mainly aimed at employers, managers and others with responsibility for health and safety, and will also be useful to employees and safety representatives Establish work health and safety practices . 1. 1A Access and interpret WHS legislation, regulations, code of conduct and workplace policies and procedures . 2. 1B Develop procedures for hazard identification, assessment and risk . control . 12. 1C Monitor risk controls and hazard-specific procedures to support legislative and regulatory. A risk, on the other hand, is the chance that a hazard will cause harm. As part of your risk assessment plan, you will identify hazards but then calculate the risk or likelihood of the hazards occurring. The goal of a risk assessment plan will vary across industries, but overall, the goal is to help organizations prepare for and combat risk

Office hazards and risks. There are many hazards when working in an office environment including incorrect workstation set-up, poor lighting, poor layout of furniture and equipment, poor housekeeping, electrical hazards and equipment hazards. Workplace Stress. Workplace stress can occur when people are subjected to demands and expectations that. Process Safety Management is a system of analyzing current process hazards and designing, implementing and operating safer plant, equipment, and working conditions. TheSaferyMaster is the leading Process Safety Management Consultants in India. HIRA enables you to reduce risk and achieve safety compliance. Our safety audit service and Hazop training bring immediate improvements to safety and. Step 1 - Identify hazards -. Identify and find things which have the potential to cause harm, these can include: Biological hazards - Bacteria, viruses, animals, other humans. Chemical hazards - Hazards stemming from any hazardous chemical. Ergonomic hazards - Repetitive movements, incorrect posture, incorrect set up of work environment The actual health risk of a chemical depends on the toxicity and the actual exposure. No matter how toxic the material may be, there is little risk involved unless it enters the body. An assessment of the chemical's toxicity and the possible routes of entry will help determine what protective measures should be taken accordance with Management of Health and Safety at Work Regulations 1999 for their buildings and activities including, for example, school visits. The risk assessment should detail any risks associated with a facility or activity and what precautions must be taken to minimise any risk. The HSE guide 'Five steps to Risk Assessment' is a usefu

HLTWHS004- Risk Analysis in Community Services Work

Both provide detailed technical guidance for the assessment of seismic safety for nuclear installations. Seismic hazard is a key contributor to overall plant risk evaluation. At the same time, observations regarding extreme seismic events are rather limited, and predictive models are subject to considerable uncertainties, Rzentkowski said The HVA provides a systematic approach to recognizing hazards that may affect demand for the hospitals services or its ability to provide those services. The risks associated with each hazard are analyzed to prioritize planning, mitigation, response and recovery activities. The HVA serves as a needs assessment for the Emergency Management program